: 알리발 가죽 핸들커버 DIY 작업! 봉고3,인피니티 G35쿠페
본문 바로가기

차쟁이/KIA BONGO3

알리발 가죽 핸들커버 DIY 작업! 봉고3,인피니티 G35쿠페

반응형

안녕하세요. 히도리 입니다.

 

재작년쯤이였나요?

도티그컴파니에서 핸들커버DIY제품을 판매를 했었습니다.

지쿠페에 작업을 해보고 일체감이 아주 마음에들어 뉴포터와 아반떼MD에도 장착을 했었죠.

 

인피니티에 작업한 제품은 도티그컴파니에서 구입했던 제품인데 타공이 되어있고 약간 스폰지가 들어있는 타입이라 푹신푹신한 타입의 핸들커버 DIY 제품이였습니다.

 

Hi. It is Hidori.

 

Was it about two years ago?

I sold the steering wheel cover DIY products at Dotigkompany.

I was working on the Guppy and I liked the sense of unity and installed it on the New Porter and the Avante MD.

 

The product I worked on for Infiniti was a product that I purchased from Dotigkompanie, but it was a piercing type, and it was a type of handle cover DIY that was a kind of fluffy type because it contained a little sponge.

 

그리고 뉴포터와 MD에는 알리에서 직구로 구입한 가죽 핸들커버!

 

2년정도 써보니 제 손에는 가죽타입의 핸들커버가 훨씬 괜찮더군요.

타공타입은 말랑말랑해 손이 편하긴 한데 뭔가 약간의 이질감??

 

가죽타입은 핸들순정커버같이 완벽하게 일체감이 느껴져 핸들링할때도 그립감도 좋고 순정스럽기도 하고 ~

아무튼 알리나 이베이에서 핸들커버 검색해보시면 여러 제품이 있으니 원하시는것 구매하시면 될꺼 같습니다.

 

진짜 알칸트라 커버도 있긴 한데 그건... 해외직구라도 가격이 꽤....

 

케이세븐에는 알칸트라 핸들커버를 사용하고 있습니다만~ 느낌은 알칸트라가 최고! 허나 떄가 엄청 묻는다는 단점...

 

 

히도리 뉴포터가 판매가 되어 새로운 주인을 모시러 떠나고 제 곁으로 온 봉고3!!!

핸들커버가 없어서 핸들커버 DIY제품을 장착해보기로 했습니다.

 

And New Porter and MD leather handle cover was purchased at Ali in the fastball!

 

I've been using it for about two years, and the leather-type steering wheel cover is much better in my hand.

The perforation type is soft and easy to handle.

 

The leather type is like a genuine cover of the steering wheel. I feel a sense of unity perfectly, and even when I handle it,

Anyway, if you look at the handle cover on Ali or eBay, there are several products.

 

There is also a real Alcantara cover, but ...

 

We use Alcantra steering wheel cover in Keiseen, but feeling is the best in Alcantara! But the disadvantage of asking a lot of time ...

 

 

Hidori New Porter is on sale and left to pick up a new owner, Bongo 3 who came to my side !!!

We did not have a handle cover, so we decided to install a handle cover DIY product.

 

타입은 당연히 가죽타입으로 !

작업하는김에 인피니티도 가죽타입으로 변경하기 위해 2개를 구입했습니다.

 

Type is of course leather type!

I bought two to change the type of leather infiniti as I work.

 

 

약 3주만에 도착한 핸들커버 입니다.

 

The handle cover arrived in about 3 weeks.

 

 

색상은 스티치가 검정색도 있고 파랑색도 있습니다만~ 전 정열적인 빨간색으로 포인트 주기 위해 레드 스티치로 구입!

 

The color is stitch black and there is also blue color, but I bought red stitch to give a point to the red in the passionate red!

 

 

해외 판매자인데 뭔가 이쁘게 손글씨로 편지를 썼습니다만... 까막눈이라 뭐라고 하는지 모르겠네요.

사탕도 몇개 들어있던데~ 국내 판매자나 외국 판매자나 ~ 장사수법은 비슷한가 봅니다.

아마 만족하면 알리에서 구매결정 빨리 눌려달라는거겠지요?

아니면.. 낭패!

 

I am a foreign seller, but I wrote something with a handwritten letter, but ... I do not know what to say.

There are also some candies ~ Domestic sellers or foreign sellers ~ I think the business method is similar.

If you are satisfied, would you want to make a purchase decision in Ali quickly?

Or ... flood!

 

 

가죽 핸들커버긴 해도 진짜 가죽은 아닙니다.

가격이 1000원이니깐요!

레자인것 같은데~ 그래도 나름 가죽이랑 비슷합니다.

 

똑같은 제품들 국내에서 판매하는 업체들도 많이 있던데 가격이 제각각입니다.

 

일단 해외직구로 구입하면 배송시간이 조금 걸릴뿐이지~ 가격은 천원대 입니다.

참고하세요!

 

Leather handle cover is not real leather even long.

The price is 1000 won!

It looks like leather, but it is similar to my own leather.

 

There are many companies selling the same products in Korea, but their prices are different.

 

Once you buy it by overseas fastball, it takes only a little time to send ~ The price is 1,000 won.

Note please!

 

 

봉고3를 들고오고~  핸들커버 없이 사용하니 그립감이 영 별로라~ 핸들커버DIY제품이 도착하기전 일단 싼마이로 쿠팡에서 구매한 핸들커버!

봉고3인 경우 380mm로 구매하면 되는데... 핸들커버가 뭘로 만들었는거지... 핸들 끼우다 바로 파손...

판매자랑 몇번의 실랑이끝에 환불 받았습니다만...

 

이런것 보면 해외판매자가 반품,교환 더 잘해주는듯 합니다.

 

우리나라 판매자들은 크게 패널티가 없으니 말이죠.

 

하다못해 공공기관 입찰같은 곳에도 판매자 잘못이 있고 제대로 처리를 안하면 패널티가 있는데....

 

Bongo 3 comes with ~ I use it without a steering wheel cover, so I feel a sense of grip. ~ Handle Cover DIY Handle cover purchased from Mai Lo Kupang once before the product arrived!

If you buy a Bongo 3, you can buy 380mm ... the handle cover is made of ...

I was given a refund at the end of a few cheerful sales ...

 

It seems that overseas sellers are better at returning and exchanging.

 

The seller of Korea does not have a big penalty.

 

There is a penalty if there is a seller's fault in the place such as a bid of a public agency and does not process properly.

 

 

무튼 알리발 핸들커버가 도착하고` 후다닥 작업했습니다.

 

Anyway, Ali's foot handle cover arrived and it worked.

 

 

작업하는 방법은 ~ 핸들커버를 핸들에 맞추고난뒤 스티치에 실을 한땀한땀 박으면 끝!

 

자세한 작업방법은 인피니티 핸들커버 DIY 검색하시면 나옵니다.

 

How to work ~ After aligning the handle cover with the handle, stitch on the stitch and you will end up wearing a sweat!

 

You can find out how to work with Infiniti Handle Cover DIY.

 

 

이런부분은 실을 뒷편으로 빼내면 더욱 이쁘게 작업됩니다.

 

전 그냥 귀찮아서 앞쪽으로 실을 배냈더니 ~ 저렇게 보기가 ...

 

These parts work nicely when you pull the yarn backwards.

 

I was just annoyed, so I poured yarn in front of me.

 

 

이런식으로 뒷쪽으로 실을 빼내면 깔끔하게 작업이 됩니다.

 

그리고 실은 최대한 떙겨서 유격을 없애면 더욱 순정틱하고 그립감도 좋아집니다.

 

If you pull the thread backwards in this way, it will work neatly.

 

And as far as possible, if you eliminate the play by pulling out the thread as much as possible, it becomes more genuine tick and the grip improves.

 

 

짜잔~ 일단 봉고3 완성~

 

한땀한땀 작업하다보면 약 1시간정도 걸리는데... 저녁시간에 실내등 하나 믿고 작업했더니 눈알이 빠질꺼 같군요.

꼭 밝은곳에서 작업하세요.

ㅋㅋ

 

Vocabulary ~ Once completed Bongo 3 ~

 

It takes about an hour when I work on one sweat. I believe that I will work on the interior light in the evening.

Please work in a bright place.

 

 

뭔가 사진이 뒤죽박죽이네요.

요건 작업하기전 핸들에 커버 덮는중입니다.

이렇게 고정 시키고 실을 하나하나 박으면 됩니다!

 

Something's messed up.

REQUIREMENTS Cover is covering the handle before working.

You can fix it and put the yarn one by one!

 

 

봉고3 작업이 끝이나고~ 이제 인피니티 작업할차례~

그런데... 기존 작업되어 있던 핸들커버 벗겨내는게 더 힘드네요. ㅜㅜ

칼이라도 하나 챙겨갈껀데... 실밥 하나하나 풀어내는게... 휴~

 

Bongo 3 work is over ~ Now Infiniti work ~

By the way ... it is more difficult to peel off the handle cover that was already working. ㅜ

I'll take a knife, too.

 

 

그래도 땀을 뻘뻘 흘리며~ 한땀한땀 작업하고 나니 뿌듯합니다.

이게 바로 DIY의 묘미 아니겠습니까!

ㅋㅋㅋ

 

실을 꽉꽉 매면 사진과 같이 핸들커버가 약간 굴곡?이 생기긴 한데~ 그래도 꽉 묶는게 훨씬 괜찮습니다.

작업모양 이쁘게 할려고 약간 헐렁하게 작업하면 핸들커버와 핸들간 유격이 생겨서 그립감이 영 별로...

일반 시내바리 할때는 크게 상관없지만 와인딩 한번씩 탈때 핸들 꽉 잡고 핸들조정하는데 그럴때마다 핸들과 핸들커버 따로 놀아 10도 꺽어야되는거 한번더 꺽게 되고 사고가 날수 있으니 말이죠.

 

But I sweat a lot and I feel like I'm working on a sweat.

This is not just the beauty of DIY!

Ha ha ha

 

If you tighten the thread, the handle cover is slightly bent as shown in the picture, but it is much better to tighten it.

If you work a little loosely to make your work look pretty, you will get a gap between the handle cover and the handle.

It does not matter much when you are in the middle of the city, but every time you wind it, you tighten the handle and adjust the handle. Every time you play with the handle and handle cover, you have to turn 10 degrees.

 

하... 그나저나... 얼마전 사고난 아반떼MD... 화물공제랑 사고가 났는데 역시나 말로만 듣던 화물공제 그대로네요.

 

차가 전손해야되는 정돈데 차도 못사는 금액을 보상해준다고 하고... 그럼 차수리 한다고 하니 차값보다 차수리가 더 많이 나오니 안된다고 하고.... 휴 골치가 아픕니다.

 

화물공제랑 보상 이야기는 차차 하나하나 포스팅 해보기로 하고 ~

 

이상 히도리 였습니다.

 

I have a car accident and I have an accident.

 

He said that he would compensate for the amount of money he could not afford to pay for his car. He said he would repair the car.

 

I will post the cargo deduction and compensation story one by one.

 

It was a strange way.

 

반응형